Added 9/6/01
The following text was copied from the Microsoft Site at:
http://support.microsoft.com/support/kb/articles/Q211/4/81.ASP
Switch Function
----------------------------------------------------------------------
/e, /embedded Forces Excel to start without displaying the
startup screen and creating a new workbook
(Book1.xls).
Example: /e, /embedded
/m Forces Excel to create a new workbook that
contains a single macro sheet.
Example: /m
/o Forces Excel to re-register itself. Specifically,
the following key is rewritten in the registry:
HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Excel
NOTE: If this key contains invalid values, they are
not corrected by using this switch. This switch only
replaces missing values.
Example: /o
/p
path rather than the default path.
Example: /p "C:\Windows"
/r
read-only mode.
Example: /r "C:\My Documents\Test.xls"
/s Starts Excel in Safe mode. ("Safe Mode" will appear in
the Excel title bar.) Safe mode starts Excel as if it is
the first time after Setup.
Safe mode bypasses the following:
- All files in any Excel startup folder.
For more information about the location of startup
folders, please see the following article in the
Microsoft Knowledge Base:
Q240150 XL2000: How to Use Excel Startup Folders
- Add-ins: The Addins dialog box still displays the
selected addins. However, the addins are not loaded.
- Excel toolbars (Excel.xlb or
original installation default toolbar settings are
used.
- Excel specific registry information: The original
installation default registry settings are used.
Registry information can include the following key and
other keys:
HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Excel\Options
NOTE: When Excel is in Safe mode, the Options dialog
box displays the default settings, not your customized
settings.
/regserver Forces Excel to register itself and then quit. Use this
switch when you want Excel to rewrite all of its
registry keys and reassociate itself with Excel files,
such as workbooks, charts, and so on.
Example: /regserver
/unregserver Forces Excel to unregister itself and then quit.
Example: /unregserver
--------------------------------------------------------------------------------
Outlook Command Line Switches
Added 9/6/01
The following text was copied from the Microsoft Site at:
http://support.microsoft.com/support/kb/articles/Q182/1/12.ASP
Command-Line Switch Purpose
------------------- -------
/CleanFreeBusy Cleans and regenerates free/busy information.
/Cleanfinders Removes saved searches from the Exchange
Server store.
/CleanReminders Cleans and regenerates reminders.
/CleanViews Restores default views. All custom views you
created are lost.
/CheckClient Prompt for default manager of e-mail,
news, and contacts
/ResetFolders Restores missing folders for the default
delivery location.
/ResetOutlookBar Rebuilds the Outlook Bar.
/Safe Launches Outlook without extensions, preview
pane or toolbar customization.
/Nopreview Turns off the Preview Pane and removes the
option from the View Menu.
/CleanSchedPlus Deletes all Schedule+ data (free/busy,
permissions, and .CAL file) from the server
and enables the free/busy information from the
Outlook Calendar to be used and viewed by all
Schedule+ 1.0 users.
--------------------------------------------------------------------------------
Customizing Outlook2002 Security Settings
Added 8/16/01
By default, Outlook2002 restricts access to potentially damaging e-mail file attachments.
To enable access to files with extensions such as .exe. or com:
Exit Outlook2002 if it is running.
Start Regedit
Go to HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\Outlook\Security
Create a new string value called Level1Remove
Enter in the file extensions you want to use, such as .exe or .bat
You can have multiple file types separated by a semicolon
exe;com
The following are a list of the file attachments that are restricted by default
.ade Microsoft Access project extension
.adp Microsoft Access project
.asx Windows Media Audio / Video
.bas Microsoft Visual Basic class module
.bat Batch file
.chm Compiled HTML Help file
.cmd Microsoft Windows NT Command script
.com Microsoft MS-DOS program
.cpl Control Panel extension
.crt Security certificate
.exe Program
.hlp Help file
.hta HTML program
.inf Setup Information
.ins Internet Naming Service
.isp Internet Communication settings
.js JScript file
.jse Jscript Encoded Script file
.lnk Shortcut
.mdb Microsoft Access program
.mde Microsoft Access MDE database
.msc Microsoft Common Console document
.msi Microsoft Windows Installer package
.msp Microsoft Windows Installer patch
.mst Microsoft Windows Installer transform; Microsoft Visual Test source file
.pcd Photo CD image; Microsoft Visual compiled script
.pif Shortcut to MS-DOS program
.prf Microsoft Outlook profile settings
.reg Registration entries
.scf Windows Explorer command
.scr Screen saver
.sct Windows Script Component
.shb Shell Scrap object
.shs Shell Scrap object
.url Internet shortcut
.vb VBScript file
.vbe VBScript Encoded script file
.vbs VBScript file
.wsc Windows Script Component
.wsf Windows Script file
.wsh Windows Script Host Settings file
--------------------------------------------------------------------------------
Changing Notepad Defaults
Added 7/14/01
If you want to change the default settings of notepad such as word wrap, font and size:
Start Regedit
Go to HK_Current_User / Software / Microsoft / Notepad
From here it is pretty easy to see what items you can change
--------------------------------------------------------------------------------
Access Gives License or Database Error
Added 6/15/01
If you try to run Access97 and get an error:
Microsoft Access can't start because there is no license for it on this machine
or
Can't find the database you specified or you didn't specify a database at all
There is a patch from Microsoft to fix this problem.
I copied it to my site since they often change the location of their files.
Download Patch
--------------------------------------------------------------------------------
Outlook Can't Create Item Error
Added 5/26/01
If you get the error Can't Create Item when attempting to open an attachment for Outlook,
the \Windows\Local Settings\Application Data\Microsoft\Forms\Frmcache.dat
file may be corrupted.
Simply delete this file and restart Outlook
--------------------------------------------------------------------------------
Opening Multiple Windows in Outlook
Added 5/14/01
If you want to have multiple windows open in Outlook (for example your InBox and Calendar),
Simply right-click on the new item and select Open in New Window
This makes it a lot easier to cut and paste between Outlook applications
--------------------------------------------------------------------------------
Setting Outlook to be the Default E-Mail Program
Added 5/14/01
Normally you can set the default mail program from the Internet Explorer (Tools / Internet Options / Programs)
If this still doesn't work for you:
Open the Explorer (not Internet Explorer)
Select Tools / Folder Options
Click on the File Types tab
Go to URL:MailToProtocol
Edit the Open action to be "C:\Program Files\Microsoft Office\Office\OUTLOOK.EXE" -c IPM.Note /m "%1"
Note: The location of Outlook may be different depending on the version of Office you have installed.
--------------------------------------------------------------------------------
Changing the Office2000 Registered Owner
Updated 4/4/01
An easier way was submitted:
Start Word2000
Go to Tools / Options / User Information
Change the current user's name.
Submitted by Terry N. Hart
Added 1/2/01
To change the name of the registered owner without reinstalling, two simple registry changes need to be made.
These are the names displayed in the opening splash screens of each application as well as the About box.
Start Regedit
Go to HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Windows \ CurrentVersion \ Uninstall \ {00000409-78E1-11D2-B60F-006097C998E7
Change the value of RegOwner and RegCompany to the ones you would like
Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Office \ 9.0 \ Common \ UserInfo]
Rename the UserInfo key
Now you should see the new name and company information when you start your Office2000 application.
--------------------------------------------------------------------------------
Reducing the File Size of Word Documents
Updated 2/20/01
There is, however, a much easier way.
Choose Tools
Options...
Open the Save tab
Uncheck Allow Fast Saves
This makes Word rewrite the entire document file from scratch each time it is saved. The save command takes slightly longer, but your files can be drastically smaller (especially if you've done lots of formatting changes).
Submitted by Brandon Lundh
Submitted 11/7/99
If you have make documents using MS Word and you make many formatting changes for the paragraph, fonts, page etc., you will see your file size gets bigger. Microsoft Word saves files by blocking, so any change you made for your document it will create a new block with the new formatting and disappear the old block without deleting it from the file.
You can solve this problem.
If you open your file and select File \ Save As and give your file a new name, it will save only the active blocks with out the old ones.
If you compare the two files you will see a difference in size
Submitted by Ziad Dabash
--------------------------------------------------------------------------------
Enabling Outlook 2000 Mail Logging
Added 10/16/00
Normally Outlook 2000 does not log Internet, SMTP, and POP sessions.
To turn on this feature:
Start Regedit
Go to Hkey_Current_User \ Software \ Microsoft \ Office \ 9.0 \ Outlook \ Options \ Mail
Create a new DWORD
Give it a name of Logging
Give it a value of 1
After this, 3 files will be created in the C:\Windows\Temp\Outlook Logging directory.
InetXP.txt logs the Internet session
Pop3log.txt logs mail-retrieval activity
Smtplog.txt logs mail-sending activity
--------------------------------------------------------------------------------
Removing the Task Scheduler
Submitted 5/6/00
To remove Task Scheduler
Start Registry Editor (Regedit.exe).
Go to HKEY_Local_Machine\Software\Microsoft\Windows\CurrentVersion\Uninstall\SchedulingAgent
Click the SchedulingAgent folder
Double-click the UninstallString key.
Copy the value data on the UninstallString key.
Quit Registry Editor.
Click Start, click Run, right-click in the open dialog box, and then click Paste.
Click OK to uninstall Task Scheduler.
Submitted by Frank Lolli
--------------------------------------------------------------------------------
Switches for Starting Outlook 2000
Added 4/11/00
Here are some switches you can add to a shortcut to OUTLOOK.EXE.
I have tested them with Outlook 2000 but they might work with previous versions as well.
Hide the Outlook Bar /folder
Have the specified folder visible /select "path/folder name"
Create an e-mail message /c ipm.note
Create a post /c ipm.post
Create an appointment /c ipm.appointment
Create a task /c ipm.task
Create a contact /c ipm.contact
Create a journal entry /c ipm.activity
Create a note /c ipm.stickynote
Prompt for default manager of e-mail, news, and contacts /checkclient
Create an item with the specified file as an attachment. /a "path/file name"
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Opening Files with Other Than the Default Application
Submitted 2/5/00
If you have more than one application you use for the same type of file (media, text, graphics etc.)
Use one as your default player, make a shortcut to the other player and put it in the C:\WINDOWS\SENDTO folder.
When you want to open a file with the non-default application, right click on the file and send it to the other application
Submitted by Roger Freeman
--------------------------------------------------------------------------------
Changing the Name of the Outlook Icon on the Desktop
Added 2/4/00
To change the name of the Outlook icon on the desktop:
Start Regedit
Go to HKEY_LOCAL_MACHINE \ Software \ CLASSES \ CLSID \ {00020D75-0000-0000-C000-000000000046}
Change the Default value to the name you want to appear
--------------------------------------------------------------------------------
Showing a Map of an Outlook 2000 Contact's Address
Added 2/2/00
You can view a map to the address of an Outlook 2000 by simply:
Open up the Contacts
Open up the contact you want to view
Select Actions / Display Map of Address or click on the icon that looks like yellow road sign with an arrow on the toolbar
Note: You need to be connected to the Internet for this to work.
--------------------------------------------------------------------------------
Re-Applying Formatting in Office 2000
Added 2/2/00
The following will work for the Office 2000 version of Word, Front Page, Excel, Powerpoint, Access, Publisher, and Photodraw
If you have a section of text formatted they way you want additional sections to look:
Select the text whose format you want to replicate
Click on the Format Painter icon. This is the one that looks like a paint brush.
Now select the new text and the formatting will be applied
To repeat this to more than one selection, double-click on the icon and it will stay selected.
When you are finished, press the ESC key.
--------------------------------------------------------------------------------
Selecting Columns in Word
Submitted 2/1/00
Selections in MS Word is usually lines or paragraphs.
To make a selection for a column across lines or blocks just press Alt key while you select your text.
You can see that the selection did not select all of the line. It just selects the block or the area that had the mouse over it.
Submitted by Ziad Dabash
--------------------------------------------------------------------------------
Having Excel 2000 Display the Year with Four Digits
Normally, if you enter 1999 or 2000 as the years in Excel, it will change it to 99 or 00.
To change Excel 2000 so it shows a four digit year:
Start Regedit
Go to HKEY_USERS \ .DEFAULT \ Software \ Policies \ Microsoft \ Office \ 9.0 \ Excel \ Options
Add or Change the DWORD Value EnableFourDigitYearDisplay to 1
Note: You may need to create the Excel and Options keys
--------------------------------------------------------------------------------
Disabling Outlook Express Splash Screen
Added 1/8/00
To disable the opening Outlook Express screen:
Start Regedit
Go to HKEY_CURRENT_USER \ Identities
For OE 5 go below this to {ABE2B8A0-C02D-11D3-867B-948FF355BD32} \ Software \ Microsoft \ Outlook Express \ 5.0
Add a DWORD NoSplash
Give it a value of 1
--------------------------------------------------------------------------------
Hidden FDISK Switches
1/8/00
Here are a few additional switches that can be used with FDISK:
/Status - Give the status of the partitions. Similar to option #4
/FPRMT - FAT32 in drivers smaller than 512 MB
/MBR - Fix master boot record
/PRI:xx - Primary partition of size XX in megs
/EXT:xx - Extended partitio
/LOG:xx - Logical drive in extended partition
--------------------------------------------------------------------------------
Customizing the Office Assistants
Added 12/28/99
You can customize the behavior of the Office Assistants.
The easiest way to delete them completely is by deleting the registry key HKEY_CURRENT_USER \ Software \ Microsoft \ Office \ 9.0 \ Common \ Assistant
Note: You will have 9.0 or 8.0 depending on the version of Office you run
You can also create dword values and turn on or off the following selected features:
Allow Most Tips - AsstAssistWithWizard = 1
Disable Showing Office Assistant with F1 - AsstAssistWithHelp = 0
Assistant Moves When In the Way - AsstMoveWhenInTheWay = 1
Disable Mouse Tips - AsstMouseTips = 0
Disable Context Sensitive Help - AsstGuessHelp = 0
Disable Keyboard Tips - Delete AsstKeyboardShortcutTips
Disable Feature Tips - AsstFeatureTips = 0
Disable Tip of the Day - Delete AsstShowTipofDay
Disable Office Assistant Help Messages - AsstAssistWithHelp = 0
Show only High Priority Tips - AsstOnlyHighPriorityTips = 1
--------------------------------------------------------------------------------
Starting Outlook Express Immediately to Mail or News
Added 12/21/99
If you want to start Outlook Express and have it immediately go to your Mail or News:
Create two new shortcuts
One is msimn /mail
The other is msimn /news
--------------------------------------------------------------------------------
Playing DVD's with Windows Media Player
Added 12/20/99
To play DVD's with the Windows Media Player
Run Regedit
Go to HKEY_CURRENT_USER \ Software \ Microsoft \ MediaPlayer \ Player \ Settings
Create a new string EnableDVDUI
Give it a value of yes
The next time you start the Media Player, you can do a File / Open DVD
--------------------------------------------------------------------------------
Stopping Applications from Starting Automatically
Updated 8/16/01
For Windows2000 or WindowsXP, you can now use the MSCONFIG.EXE that comes with WindowsXP.
Download the one from the full release product(64K)
It also lets you change the Services and BOOT.INI file as well.
Updated 12/20/99
With Windows98, you can run MSCONFIG.
Click on the Startup tab to remove apps that are starting automatically from the registry.
You can also search through the AUTOEXEC.BAT and WIN.INI files as well.
Added 11/30/97
If you have applications that you want to stop from starting automatically, there are three places you need to look, the WIN.INI file, the Startup Folder and the Registry.
The load= or run= lines in the WIN.INI file. This is in the directory where you installed Win95, usually the C:\WINDOWS directory
The StartUp folder.
Start the Explorer.
Go to C:\WINDOWS\Start Menu\Programs\StartUp folder.
Remove any shortcuts you find there that you don't want.
The Registry.
Edit the Registry
Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Run.
Remove any programs from there.
--------------------------------------------------------------------------------
Changing the Default Page Location for Front Page
Added 12/19/99
Normally Front Page opens documents in either C:\MY WEBS or C:\MY DOCUMENTS \ MY WEBS
To change these locations to another directory:
Start Regedit
Go to HKEY_CURRENT_USER \ Software \ Microsoft \ FrontPage \ Explorer \ FrontPage Explorer \ Settings
Change the DefaultWebName to the directory you want
--------------------------------------------------------------------------------
Opening a File by Dragging to Task Bar
Added 10/17/99
If you already have a application showing on the taskbar,
a quick way to open a file is to drag it with from the Explorer to that icon and hold it for a second or so. (Don't let up on the mouse).
The app will re-open with that file loaded.
--------------------------------------------------------------------------------
Eudora Lite and More than One E-Mail Account
Submitted 12/31/98
To set up Eudora Lite to work with more than one E-Mail account you need make 4 changes to the Eudora.ini file and then save the file as Eudora2.ini Etc.
Then to start Eudora on the alternate account you create a new shortcut with the target entered as C:\Eudora\Eudora.exe C:\Eudora\Eudora2.INI where "C" is the appropriate drive letter.
The 4 modifications to the Eudora.ini file are all in the "Settings" section as follows:
Where altname = 2nd user name & alternate.net = 2nd ISP
POPAccount=altname@alternate.net
ReturnAddress=altname@alternate.net
DialupUsername=altname
SMTPServer=mail.alternate.net
Note many setting will remain as they are in the primary account .ini file.
Side Note: To remove Eudora's startup splash screen add the line "NoSplashScreen=1" in the settings section.
Submitted by Moke Nelson
--------------------------------------------------------------------------------
Hidden Format Switches
Added 8/16/98
There are a couple of undocument Format switches that have been around for several years: They will work with at least DOS 6.2 and above.
FORMAT /AUTOTEST - Formats without any prompting and exits the program when finished
FORMAT /BACKUP - Like /AUTOTEST but you will be prompted for a volume label
These can be useful if your are formatting drives from a batch file or shortcut and don't want to be prompted for input.
--------------------------------------------------------------------------------
Changing the Number of Days Displayed in Outlook Calendar
Added 5/3/98
When in Outlook's Calendar program with Day View, to change the number of days shown.
For eampls press Alt along with the number of days you want to see.
For example Alt-4 would show 4 days.
Alt-M shows a Month
--------------------------------------------------------------------------------
Creating Outlook Contacts Shortcut
Added 5/3/98
To create a shortcut for your Outlook Contacts folder on the desktop
Right click on an open area of the desktop
Select New / Shortcut
Enter in the path to your outlook program followed by outlook:contacts. Note the quotes are necessary - "C:\Program Files\Microsoft Office\Office\OUTLOOK.EXE" outlook:contacts
--------------------------------------------------------------------------------
Changing File Associations
Submitted 3/1/98
Changing File Associations quickly
In Explorer select a fileof the type you want to change.
Hold down Shift & Right click the selection.
Choose "Open With".
Select the program to open the file type.
In the dialog box check the Always use this program to open this file.
Click OK
The association are now made
Submitted by Mike Clohessy
Added 6/28/97
When you double click on a data file, the application associated with that file's extension is stated the the file is loaded.
To change a the application associated with a particular file extension:
Open a Folder
Go to View / Options / File Types
Scroll down until you see the particular file extension(s) you want to change. This will be in the File type details: section towards the bottom of the dialog box.
Click on the Edit button
In the Actions box, double click on Open
In Application used to perform this action:, enter the name of the application you want to open when you open a file with the extenstion. You can enter it manually or browse to it.
Click on the Ok, Ok, and the Close buttons.
--------------------------------------------------------------------------------
Extracting files from Win95's CAB files
Note from Bob: The submitted tip will only extract files that start with the name you specificed.
To extract a file from an unknown cab file, where it will search through all cab files, from the command line, enter:
for %p in (x:\win95\*.cab) do extract %p filename
Where x\win95 is the location of you cab files and filename is the name of the file you are looking for.
To do this in a batch file, use two % signs instead of one.
--------------------------------------------------------------------------------
Recovering Damaged Text Files
Submitted 2/18/98
Here's a handy tip to recover a corrupt or damaged text file through Word 97.
It doesn't have to startout a Word file either. This can be used to recover any file that contains text.
Here's how you do it:
Open Word 97
Click FILE->OPEN and click the file you wish to recover to select it.
Down near the bottom of the page on the "Files of type" section, choose "Recover text from any file"
Click "Open".
Submitted by Melissa Gaugert
--------------------------------------------------------------------------------
Setting Swap File Size
Added 2/14/98
If when you first start your computer, a swap file is being created. You can speed the boot process by specifying this as the minimum swap file size.
Boot your system and don't open any applications
Note the size of your swap file (WIN386.SWP)
Open the System Properties dialog box (right click on My Computer and select Properties)
Click on the Performance tab
Click on the Virtual Memory button
Check Let me specify my own virtual memory settings
If you have a hard drive or partition that is not ofter used, you can change the location
For the minimum size, select the size (or slightly larger) of the swap file when you first booted.
Don't select a maximum. Let it default to the rest of your hard drive space.
--------------------------------------------------------------------------------
Defragmenting the Swap File
Added 2/14/98
Normally when you use Windows95's Disk Defragger, this will not defrag the swap file.
To defrag the swap file:
Open the System Properties dialog box (right click on My Computer and select Properties)
Click on the Performance tab
Click on the Virtual Memory button
Check Let me specify my own virtual memory settings
Check Disable virtual memory (Note: This will cause the system not to use a swap file)
Click on the OK button
Answer Yes to the warning
Click on the Close button
Reboot when prompted
You system will reboot.
Check to see that there is no swap file. If one still remains (WIN386.SWP), you can safely delete it.
Defrag your system as you usually do
Now reset the swap file to your previous setting and reboot. (Note: Do not leave your system running without a swap file)
Another method submitted by darkbringer@rocketmail.com is to create a small 200-300 meg partition on your hard drive and put your swap file there.
--------------------------------------------------------------------------------
ScanDisk with OEM SR2
Added 2/11/98
To alter the way the DOS Scandisk gets used during a SR2 bootup, you can modify the \WINDOWS\COMMAND\SCANDISK.INI file.
Added 11/29/96
With the new OEM version of Windows95, if the system was not shutdown cleanly,
the next time it is started, it will stop and prompt you before running ScanDisk.
New options are available for the MSDOS.SYS file to configure how ScanDisk will start.
AutoScan=0 will disable this feature
AutoScan=1 will stop and prompt you before starting ScanDisk. After 1 minute it will start automatically. This is the default setting
AutoScan=2 will start ScanDisk if needed automatically
--------------------------------------------------------------------------------
Substituting Drive Letters
Submitted 1/11/98
You can use the DOS SUBST command in the AUTOEXEC.BAT file to set a drive letter to a local or networked drive and directory.
This way you only need to go to a new drive letter rather than needing to go several levels deep into a directory structure.
For example:
SET SYST=D:\SYST
SET UTIL=%SYST%\UTIL
SUBST G: %DATADIR%\GRAPHICS
SUBST H: %DATADIR%\HTML
SUBST I: %DATADIR%\HTML\intrepid
SUBST M: %DATADIR%\MIDI
SUBST T: %TEMP%
SUBST U: %UTIL%
SUBST W: %DATADIR%\HTML\smulder
SUBST Z: %DATADIR%\DL
Submitted by Stan Mulder
--------------------------------------------------------------------------------
Shutting Down or Restarting Windows95 from an Icon
Submitted 12/24/97
To Shutdown Windows95, create a shortcut to:
rundll.exe user.exe,exitwindows
To Restart Windows95, create a shortcut to:
rundll.exe user.exe,exitwindowsexec
Note: This will also run the DOSSTART.BAT file if you have it. There is an easy way to not use this file and boot to DOS Mode. See my section on Booting to DOS Mode
Submitted by Jeff Pilch
--------------------------------------------------------------------------------
Saving Space Using WinZip
Submitted 10/11/97
Do you have a folder with lots of .txt ot other files that when "ZIPPED" really compress?
Try this to save valuable disk space:
Zip all the files into one big "ZIPPED" file.
Then delete the UNZIPPED files and keep the ZIP file in the original folder.
Then when you want to see a particular file, open the main "ZIP" file but don't extract the files, just double click the file of interest right in the WinZip screen and it will open.
If you modify the file and save your changes in the normal fashion, WinZip sees the change and asks if you want to update the file in the ZIP to which you of course say yes or Ok.
The net result is your files take up a lot less disk space and the files are easily accessable. (I have a group of .txt files that ZIPPED are just over one Meg but unzipped are over 7.5 Megs!)
Submitted by Mocha
--------------------------------------------------------------------------------
Office97 and Plus Pack Themes
Submitted 9/13/97
Plus Pack users who install Office 97 will experience crashes when using the THEMES.EXE to change their desktop.
The file must be manually replaced with a new one on the Office 97 CD-ROM.
It is not done by default during the Office installation.
The warning is buried deep in the setup instructions and easily missed.
Note from Bob: You can download the patched version of the file at THEMES.EXE- Updated Themes.exe version 4.40.311
Submitted by Larry Stone
--------------------------------------------------------------------------------
Opening a Files for Editing
Submitted 5/10/97
I would call this a Web Authoring Tip, but it has many other uses...
Adding an 'Edit' option to HTML Documents Options Menu.
When I double click my *.htm files it always fires up my browser.
Well sometimes I want to edit that document instead. I can put Notepad in the Send To Folder to ease this problem. Here is another way to deal with this that is a bit slicker:
From Windows Explorer, select View then Options
Click the File Types Tab.
Select the type you want to add edit for (in my example this would be 'Netscape Hypertext Document' or *.HTM
Click the Edit Button.
From the Edit File Type panel click the New button.
Action is: &Edit, Application used to.... is: c:\windows\notepad.exe %1
Click OK, then Close, then Close.
Now when you secondary (right) click an HTML Document select Edit
from the menu (or press E) and you are now looking at the source in Notepad.
You can use a similar process for Graphic files (JPG, GIF, etc) to send them to your favorite Graphics program.
Submitted by Eric Sandoz
--------------------------------------------------------------------------------
Opening Associated Files from a DOS Box
Submitted 4/25/97
For a file with its associated application, say Word for Windows, and a data file, FILE1.DOC
At a DOS prompt, type START FILE1.DOC (or just file1 if it's unique). Word comes up and loads the document.
Submitted by Marc Linn
--------------------------------------------------------------------------------
Using Another E-Mail Package when Exchange is Installed
Added 3/22/97
Normally when web browsing, if Exchange is installed, and you click on a e-mail address
it will default to opening up. If you want to change it to another e-mail program:
Open up a Folder
Select View / OptionsClick on the File Types tab
Scroll down to URL:MailTo Protocol
Click on the Edit button
Under Actions, highlight open
Click on the Edit button
Under Application used to perform action
From here you can browse to the e-mail program you want to use
Eudora Pro has an option to set that automatically. Other programs may have switches you need to include.
Pegasus needs a -T %1 for it to automatically insert the e-mail address
--------------------------------------------------------------------------------
Power Surfing
Submitted 3/18/97
This tip works especially well if you have a large monitor and run at a high resolution...
If you want to really power surf the web, open up more than one browser. Arrange them on the screen so that you can see at least part of each one at all times.
Once this is done, you can now drag links from one browser to another. This saves you from having to use the back button constantly, especially if you are on a page like a search engine, where there are lots of links and you want to try a bunch of them.
Also, if you encounter a web page with frames, and you want to break out of the frames, you can drag a link to a new browser. No more frames.
(You can also right-click a link and choose "Open in New Browser".)
Here's an example of using two browsers...
Let's say you are going to be using a search engine for the next hour or so. Start two browsers and tile them vertically. (Minimize all programs except the two browsers, and right click a blank spot on the taskbar, then choose 'tile vertically'). Now drag the edges of the browsers so that the browser on the left is about 3 inches wide. Drag the edges of the browser on the right so that it takes up the rest of the screen. Now, using the browser on the left, open your favorite search engine and do a search. When the list of hits are displayed, drag a link into the browser on the right.
This lets you see all the hits from the search engine while you are surfing those sites... no more hitting the 'back' button all day long.
Submitted by John M.
--------------------------------------------------------------------------------
Lotus 123 Release 5 Lockup
Submitted 12/18/96
If your Lotus 123 Release 5 for Windows grays out the spreadsheet and locks up, here's what to do:
Go to Control Panel, System, Device Manager Performance, Graphics
Move the bar to the left until the problem goes away.
You'll have to reboot and experiment each time.
When the problem goes away, go back to System and move it up one notch to tweak it.
That way you'll be going as fast as you can with the graphics limit.
Submitted by Thomas Wilson
tjwilson@phoenix.net
--------------------------------------------------------------------------------
Wildcards with DIR and File Find
Added 11/29/96
In addition to the usual wildcards for doing such things as a DIR or File Find,
new options are available with Windows95. The following are a few examples:
COM - All files and folders that have COM in the extension
*ABC* - All files and folders with ABC somewhere in the name
*ABC - All files with ABC as the last characters in the name (no including the extension)
*ABC? - All files with ABC as the second to last characters in the name
?ABC* - All files and folders with ABC as the second through the fourth letters in a name
?ABC? - All files and folders with at least one letter before and after the ABC
--------------------------------------------------------------------------------
ScanDisk Command-Line Switches
Added 11/24/96
Scandskw
drive: - Drive letter of disk you want to scan
/A or /ALL - Scans all local, non-removable hard drives
/N or /NonInteractive - Start and closes ScanDisk Automatically
--------------------------------------------------------------------------------
Defrag Command-Line Switches
Added 11/24/96
Defrag
drive: - Drive letter of the disk you want to defrag
/all - Defrag all local, non-removable drives
/F - Defrag files and free space
/U - Defrag files only
/Q - Defrag free space only
/concise - Display the Hide Details view
/detailed - Display the Show Details view
/noprompt - Immediately starts Defrag
--------------------------------------------------------------------------------
Fixing Page Fault in MPREXE.EXE
Added 9/25/96
Occasionally, after Exchange is installed, you will get errors that indicate that MPREXE.EXE caused a page fault in KERNEL32.DLL
To solve the problem, delete the .PWL file associated with your login ID.
Another solution is to download the Password List Update (278 K) to repair the existing PWL file.
--------------------------------------------------------------------------------
Auto-Dialing for 32-bit Internet Applications
Submitted 7/11/96
If your 32-bit Internet applications do not automatically invoke your
Windows 95 Dialer, here is a way I found to enable this feature.
First, bring up an internet application such as Netscape or Internet Explorer.
Next, manually dial into your internet provider by double-clicking your connection icon.
Once connected, go to the Control Panel and double-click on the Internet icon.
Once the window open, uncheck the checkbox titled "Dial whenever an Internet Connection is needed".
Click the check box again and make sure there is a check in the checkbox.
Next, click the APPLY button.
Finally , click the OK button.
Once you do this, close your internet application and disconnect from your internet provider.
Re-start your Internet application and the Windows 95 dialer should start up.
NOTE: From my experience, all Internet applications will be effected and will automatically start the Windows 95 dialer.
Submitted by J. Walker
jpw@openix.com
--------------------------------------------------------------------------------
DOSSTART.BAT File
Submitted 6/23/96
There's a file name DOSSTART.BAT in the WINDOWS directory. By editing this file you will be able to configure how to start DOS whenever you exit Windows to DOS mode.
This is just like an AUTOEXEC.BAT file that starts up your system.
Submitted by Robo
tttran@acs.itd.uts.edu.au
--------------------------------------------------------------------------------
Fixing Corrupted Exchange Files
Submitted 5/8/96
To replace corrupted files in MS-Exchange run
c:\program files\microsoft exchange\mlset32.exe
Normally, just removing exchange won't delete the old files.
If it should happen that one is corrupted it won't be replaced by the original from the CD when exchange is added again.
Running the program above launches the original exchange setup applet which guides you through the original install process.
Submitted by Geoff J. Wiener
geoffw@atcon.com
--------------------------------------------------------------------------------
Emergency Recovery Utility
Submitted 5/8/96
Microsoft includes their Emergency Recovery Utility(ERU) on the 95 CD-ROM
This utility makes a backup of the registry and other important system files.
In some cases Windows 95 can be fixed by restoring the registry with this utility.
The ERU program is in the \OTHER\MISC\ERU directory on the Win95 CD.
If you have the floppy version of Win 95, the utility can be found at Microsoft's web site
http://www.microsoft.com/windows/download/eruzip.exe
ERU is also a good way to keep recent backups of all your important system files!
Submitted by Kirk Davis
kirk@olinter.com
--------------------------------------------------------------------------------
Turning off the ending = with Exchange
Added 4/9/96
When using Exchange, sometimes other e-mail packages will end
each line with a = character.
To turn this off:
Open the Control Panel
Double Click on the Mail / Fax icon
Highlight Internet Mail
Click on Properties
Click on Message Format
Uncheck Use MIME when sending messages
--------------------------------------------------------------------------------
Using the Mouse to copy text in a DOS program
Added 3/30/96
If you want to use your mouse to select an area to copy while you are in a windowed DOS program:
Right click on the icon that starts the program
Select Properties
Click on the Misc tab
Check the QuickEdit box
This eliminates the need to select text by using the pull down menu.
--------------------------------------------------------------------------------
Using Exchange with more than one phone number
Added 3/29/96
If you set up exchange to connect using the modem, you can only have one phone number listed.
If you have more than one phone number available for your provider, you would need to create another profile,
which would have your e-mail to go to two mail boxes.
To get around this problem, simply select Network for the connection.
Connect first using either phone number and then start Exchange
Then no matter what phone number you used to connect to the internet,
all your e-mail will be in one place.
--------------------------------------------------------------------------------
Backing up the Registry
Use CFGBACK.EXEon the Win 95 CD. It is in the /OTHER/MISC/CFGBACK directory.
It will save up to 9 copies of the registry in*.rbk file format.
You can restore any of these when necessary.
Submitted by KJ King
--------------------------------------------------------------------------------
Adding NOTEPAD to SENDTO
Submitted 1/11/96
Create a shortcut to notepad.exe in the C:\WINDOWS\SENDTO directory.
Then, you'll have the option to view a files contents by right-clicking it and "sending" to the notepad.
Immensely useful for deciphering old set-up files (or .DOC files that aren't Word files, READ.ME etc.)
Submitted by Mike Blackmer
mezzb@ix.netcom.com
--------------------------------------------------------------------------------
Eudora Pro for Win95
Added 12/27/95
If you are using the Internet Explorer and send e-mail, Win95 defaults to using Exchange.
If you would rather use Eudora Pro as your e-mail program:
Start Eudora Pro for Win95
Select Tools
Select Options
Select Mapi
For the section Use Eudora MAPI Server, select Always
Now when you e-mail from within the Internet Explorer, Eudora will come up as your
e-mail program.
--------------------------------------------------------------------------------
Norton Utilities
Submitted 11/5/95
If the readings on the amount of hard drive space is showing
more than is possible
Go into Norton Recycled bin
Hit empty Norton Protected files
This will now give you an accurate reading.
Submitted by K.J. King
kjking@execpc.com
--------------------------------------------------------------------------------
Using EDIT
Added 9/29/95
The DOS based text editor that comes with Windows95 has some advantages
over the one that came with prior versions of DOS.
It will let you load multiple files.
It will let you call wild cards from the command line (e.g. EDIT *.BAT).
EDIT can also be used on prior versions of DOS.
Just copy EDIT.COM to your old DOS directory.
--------------------------------------------------------------------------------
Creating Distribution Lists for Exchange E-Mail
Added 9/26/95
Start Exchange.
Open up the Address Book.
Create a New Entry.
Select Personal Distribution List from the menu.
Type in the Name of the List as well as any notes.
Click on the Add/Remove Members button.
Select the people you want on the distribution list.
You can use the Windows Ctrl or Shift with left mouse button to select multiple entries.
Click the next two OK buttons.
To send to your Distribution List, simply create your e-mail as usual and select it from the Address book.
--------------------------------------------------------------------------------
Using Memmaker
Submitted 9/23/95
Here’s a blast from the (supposed) past:
Run Memmaker from the MS-DOS prompt.
It will reboot in MSDOS mode and then run as before.
When you open DOS Prompts and DOS games they will have many of the TSRs in HIMEM
I have 637K Conventional memory for all DOS apps!
Submitted by Dan Rhodes
dan@west.net
--------------------------------------------------------------------------------
Signatures Using WordMail
Added 9/21/95
If you are using WordMail that comes with Office95, you can send e-mail using Microsoft Word.
Exchange will automatically detect the addition and start WordMail when you create a new e-mail or reply to an existing one.
It will use Word's spell checker, most of the WinWord text formatting capabilities (centering, full justification, bold, italics)
a special Mail button bar and quite a few new features. It is certainly worth trying out.
This may sound like MS hype but I'm actually quite impressed
To include a signature:
Start a new message (Ctrl-N)
Type in your signature.
Highlight your signature text.
From the pulldown menu, select Edit / Autotext.
Type in signature for the name.
Click on the Add button.
Now when you send any message, this text will be added to the beginning.
Advantages are:
By adding the text to the beginning of the file, a reply will have your signature at the end of your reply, not at the end of their message.
You can format text with Bold, Italics, Underlines etc. Anyone using Exchange can also view them
--------------------------------------------------------------------------------
Adding New Document Templates
Submitted 9/3/95
Save a blank file with the program for the documents you wish to create the templates, into the hidden directory \WINDOWS\ShellNew.
Then open the Registry Editor and add the key "ShellNew" under the extension related to that document (ie. .BAS, .ORG, .DXF)
Add a new substring and name it Filename
Double-click Filename and type the name of the blank document you just saved.
Now you can right-click on the desktop, select New and you’ll see the option to create a document-type icon for the application you just selected.
I have found a lot of variations and options on this tip.
Submitted by Xavier Flix
mailto:x.fkix@server1.codetel.net.do
--------------------------------------------------------------------------------
New XCOPY Switches
There are quite a few new switches to the XCOPY command. To get a full listing, type XCOPY /?. Below are some of the additions over DOS 6.X.
/C - Continues copying even if errors occur
/I - If destination does not exist and copying more than one file, assumes that destination must be a directory
/Q - Does not display file names while copying
/F - Displays full source and destination file names while copying
/L - Displays files that would be copied
/H -Copies hidden and system files also
/R - Overwrites read-only files
/T - Creates directory structure, but does not copy files. Does not include empty directories or subdirectories. /T /E includes empty directories and subdirectories
/U - Updates the files that already exist in destination
/K - Copies attributes. Normal Xcopy will reset read-only attributes
/Y - Overwrites existing files without prompting
/-Y - Prompts you before overwriting existing files
/N - Copy using the generated short names
--------------------------------------------------------------------------------
Problems with older Win 3.X programs
There is a program, MKCOMPAT.EXE in the SYSTEM directory. If allows you to change several settings that could help with problem programs.
No comments:
Post a Comment